Analog Addressabl Fire Alarm Control Panel LE-FN-4

The LE-FN-4127 control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting 127 devices of any combination (sensors or modules),and 127 analog sounder bases, for a possible total of 254points. Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the RS-232 interface allows the convenience of programming via a PC. The system will support a variety of Lifeco devices: photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone monitoring module. The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic tools. An Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service makes this an exceptional product both in performance and value.

• Dual RS-485 bus for panel network

• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface

• 5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)

• 500mA of auxiliary power available rated at 24 VDC

• Loop Explorer Windows® configuration utility

• *500 network wide software zones

• Network Capability of up to 64 panels

• RS485 slave bus for expansion - up to 31 LEFN-

4127-IO boards or up to 15 LE-FN-LCD-Sserial annunciators and up to16 LE-FN-4127-IO boards

• Auto-learn feature

• Built in help and alarm information screens

• Fire Drill test function

• Walk Test function

• Alarm Verification feature

• FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer

• Operates on 120VAC or 240VAC input voltage

• Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including:

*Cause & Effect action

*Disable function configuration

*Test mode configuration

• UL 864 9th edition Listed

• Analog design using Lifeco’s advanced DCP protocol for fast and robust communication

• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop

• Uses standard wire, no shielded or twisted pair required on SLC loops

• Supports Class B (style 4) and Class A (style 6 or 7) SLC loops

• 4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each

• Programmable sensitivity levels per device & automatic day/night sensitivity modes

• Automatic daily calibration & drift compensation routine

• Large 8-line x 40-character LCD display (320 char.)

• 2 or 4 loop versions (800 addresses/sub-addr. max.)

UL S24976