Inconel Round Bars

E ARE MANUFACTURER AND EXPORTER OF INCONEL FASTENERS, BARS, FLANGES, PIPES, FITTINGS, SHEETS, PLATES, COILS & HOT FORGED OF STANDERD SIZE OR AS PER YOUR DRAWING OR BIG SIZES :

1)STAINLESS STEEL & NICKEL ALLOYS SHEET;PLATES & COILS:-

 0.1 MM to 100 MM Thick. 1000 MM or 1250 or 1500 MM or 2000 MM Width, Length up to 6000 as you Required in 2B/CR;BA;MAT; MET PVC;HR Finish.

INDIAN MAKE : JINDAL, SALEM, SHAH ALLOYS ETC &

IMPORTED MAKE : ACRENOX, COLUMBUS, DKC ETC...

GRADES:ASTM A 240 TP 304/L/H;316/L/H/TI;317/L;310;321;347;904L;410;420;430 MONEL; NICKEL; INCONEL; HEASTLLOY;TITANIUM;DUPLEX;SUPER DUPLEX;UNS;COPPER;BRASS;POSPEROUS BRONZE(PB);CUPPRONICKEL..

2)STAINLESS STEEL & NICKEL ALLOYS PIPES,TUBES & FITTINGS:-

 SEAMLESS & WELDED PIPES/TUBES & BUTTWELD PIPE FITTINGS  & FORGED FITTINGS: ELBOW; TEE; CON-REDUCERS; COUPLING; NIPPLE ETC….

SIZES : 1/8” N.B or O.D to 20” N.B or O.D,

THICKNESS IN SCH : 5S, 10S, 40S, 80S, 160S, XX & THICKNESS IN MM : 0.5 MM TO 20 MM ETC.

GRADE: ASTM A 312 TP 304/L/H;316/L/H/TI;317/L;310;321;347;904L; 410;420;430MONEL; NICKEL;INCONEL; HEASTLLOY;TITANIUM;DUPLEX;SUPER DUPLEX;UNS;COPPER;BRASS;POSPEROUS BRONZE(PB);CUPPRONICKEL..

3)STAINLESS STEEL & NICKEL ALLOYS  FLANGES:- SORF;BLRF;WNRF;SOLJ;TABLE”D””E””F” & IN CLASS 150 TO 3000.GRADE:ASTM A 182 F304/L/H; 316/L/H/TI; 317/L; 310; 321; 347; 904L; 410; 420; 430MONEL; NICKEL; INCONEL; HEASTLLOY;TITANIUM;DUPLEX;SUPERDUPLEX;UNS;COPPER; BRASS; POSPEROUS BRONZE(PB); CUPPRO NICKEL; ETC…

4)STAINLESS STEEL & NICKEL ALLOYS FASTENERS:- STUD;BOLT;NUT;WASHER;REVIT;COIN ETC...

GRADE:AISI304/L/H;316/L/H/TI;317/L;310;321;347;904L;410;420;430;MONEL;NICKEL;INCONEL;

HEASTLLOY;TITANIUM; DUPLEX;SUPER DUPLEX;UNS;COPPER;BRASS;POSPEROUS BRONZE(PB);

CUPPRONICKEL;ETC…

5)STAINLESS STEEL & NICKEL ALLOYS ROUND BARS:-

 BRIGHT ROD;HEX;SQUARE; WIRE IN SIZE:3.17MM TO 400MM. GRADE: AISI 304/L/H;316/L/H/TI;317/L;310;321;347;904L;410;420;430; MONEL; NICKEL; INCONEL; HEASTLLOY;TITANIUM;DUPLEX;SUPER DUPLEX;UNS;COPPER;BRASS;

POSPEROUS BRONZE(PB);CUPPRONICKEL…

6)HIGH NICKEL ALLOYS:-

SHEET;PLATES;COILS;PIPES;TUBES;ROUND BARS;FORGED BARS; FITTINGS; FLANGES; FLAT;CIRCLES;FASTENERS:STUD;BOLTS;NUTS;WASHER & ALL FORGED PRODUCTS.

GRADE:MONEL;NICKEL;INCONEL;INCOLY;HEASTLLOY;TITANIUM;DUPLEX;SUPER DUPLEX;UNS;

COPPER ALLOYS: CUPPRO NICKEL TUBE 70/30;90/10; PB;BRASS ALLOYS:ADMERLLY BRASS TUBE;